<P=004>
(Continued)
(Remote control operation)
■APMS (Automatic Programmable Music Selector)
DIRECT KEY
PROGRAM MD 
CD 
CLEAR
MD 
MD
CD 
CD 
CD
1
1 Select the desired programme source, CD or MD, by pressing the CD ■ or MD ■ button.
2 Press the PROGRAM button.
●"PROGRAM" will flash.
3 If you have selected CD, press one of the buttons (1 0 - 3 0) to select the disc to be played.
4 Use the DIRECT KEY to select the desired track number.
5 Repeat steps 3 and 4 for any other tracks. (Repeat step 4 only for MDs). Up to 20 MD tracks or 32 CD tracks can be programmed.
2
Playback order
4
6
●To select another track on an MD or on the same CD, skip step 3.
●The programmed playback order and the total playing time of the programmed tracks will be automatically displayed, and only those track numbers will appear in the music schedule.
●If the total playing time of the programmed tracks exceeds 999 minutes 59 seconds,
●If the total playing time of the programmed tracks exceeds 255 minutes 59 seconds, "255:59" will be displayed. In this case, the programmed tracks are stored. (only for MDs).
6 Press the CD ■ or MD ■ button.
●"PROGRAM" will appear.
7 Press the CD 0 6 or MD 0 6 button to start playback of the programmed selections.
●After all of the programmed tracks have finished playback, the unit will automat- ically stop.
To clear the programmed selections:
Press the CLEAR button whilst the "PROGRAM" indicator is flashing.
●Each time the button is pressed, one track will be cleared, beginning with the last track programmed.
To cancel the APMS:
Whilst the unit is stopped in the APMS mode, press the CLEAR button to turn off the "PROGRAM" display.
●The programme contents will be erased.
●When you open the disc tray or a MiniDisc is removed, the APMS mode will be cancelled.
To check which tracks are programmed:
Whilst the unit is stopped in the APMS mode, turn the jog dial. Or press the 5 or 4 button on the remote control.
●When the jog dial is turned clockwise, the next track number will appear. When it is turned
Adding tracks to the programme
If a programme has been previously stored, the "PROGRAM" indicator will be displayed. Then follow steps 2 - 6 to add additional tracks, the newly selected tracks will be stored after the last track of the original programme.
Notes:
●It is not possible to insert an additional track between programmed tracks that have already been entered.
●Programming and cancelling are not possible during playback or in the pause mode.
23
