Sharp MD-X60H operation manual 11,12, How To Use The Built-Intimer

<P=003>

HOW TO USE THE BUILT-IN TIMER

●Before setting the timer, make sure that the clock setting is correct. (Page 8)

●The start time and stop time, which are set with this operation, will be kept in memory until the AC power lead is unplugged or the setting is changed.

TIMER/

DELETE

Jog dial

ENTER

2

3,4

5

6

7

8

9

10

11,12

1

2

■To select the timer playback mode

Before timer playback, the following preparations are required.

●Load a CD, MD or Tape.

●Select a CD to be played.

●Preset the radio station.

1 Press the TIMER/DELETE button.

2 Within 10 seconds, turn the jog dial so that the "TIMER SET" display appears.

3 Within 10 seconds, press the ENTER button.

4 Select "TIMER PLAY" by using the jog dial.

5 Press the ENTER button.

●The start time setting display will appear.

6 Turn the jog dial to set the hour at which to start, and then press the ENTER button.

7 Turn the jog dial to set the minute at which to start, and then press the ENTER button.

●If not set manually, the ending time will be automatically set for one hour after the starting time.

8 Turn the jog dial to set the hour at which to stop, and then press the ENTER button.

9 Turn the jog dial to set the minute at which to stop, and then press the ENTER button.

10Turn the jog dial to select the function.

MD CD TAPE TUNER AUX 1 AUX 2 AUX OPT.

●If TUNER is selected, press the ENTER button, then select the preset number using the jog dial.

●When no stations have been programmed, "NO PRESET" will be displayed, and the programme operation will end. In this case, programme some stations and then reprogramme from the beginning.

11Press the ENTER button.

12Adjust the sound level using the jog dial.

13Press the ENTER button.

●Be careful not to turn the volume up too high.

(When the start time is reached in timer playback, the volume will increase gradually to the level previously set.)

To change the timer setting:

Start again from steps 1 - 13.

■Setting timer playback

1 Press the TIMER/DELETE button.

●Turn the jog dial so that the "T-STANDBY" display appears.

●If the start and stop times have not been set, the "T-STANDBY" display does not appear. Set the time.

2 Press the ENTER button.

●The settings will appear in order, and the unit will enter the timer playback stand-by mode. (The unit will enter the stand-by mode.)

41

MD-X60H(SUK) TINSE0227AWZZ