<P=005>
(Continued)
To check the timer setting:
①Whilst in the timer
②Within 10 seconds, turn the jog dial so that the "TIMER CALL" display appears.
③Within 10 seconds, press the ENTER button.
●The timer settings will appear in order, and then the original display will reappear.
To cancel the timer operation:
If the power is turned on, the timer will be cancelled. The timer operation can also be cancelled as follows.
①Whilst in the timer
②Turn the jog dial so that the "TIMER CANCEL" display appears.
③Within 10 seconds, press the ENTER button.
●The timer operation will be cancelled ("TIMER" or "TIMER REC" will go off.) The start and stop times will be stored.
TIMER/
DELETE
Jog dial | ENTER |
3
4
5 
■ Sleep operation | ■ Simultaneous sleep and timer operation | |
|
|
|
The radio, compact disc and MiniDisc can all be turned off automat- ically.
1
2
3 Within 10 seconds, turn the jog dial so that the "SLEEP" display appears.
4 Within 10 seconds, press the ENTER button.
●If you do not need to change the time, go to step 5.
To change the sleep time:
Whilst the sleep time is displayed, turn the jog dial to adjust the time. (Maximum: 2 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during the sleep oper- ation.
●2 hours - 5 minutes →
●5 minutes - 1 minute →
5 Press the ENTER button.
6 The unit will enter the
●The volume will decrease gradually 1 minute before the preset sleep time has elapsed. At this time, you cannot change the volume.
To confirm the sleep timer setting:
①Press the TIMER/DELETE button.
②Turn the jog dial so that the "SLEEP" display appears.
To use sleep and timer playback in combination:
①Perform steps 1 - 13 on page 41 "To select the timer playback mode".
②Perform steps 1 - 5 on page 43 "Sleep operation".
③Perform steps 1 - 2 on page 41 "Setting timer playback".
To use sleep and timer recording in combination:
①Perform steps 1 - 12 on page 42 "To select the timer recording mode".
②Perform steps 1 - 5 on page 43 "Sleep operation".
③Perform steps 1 - 2 on page 42 "Setting timer recording".
Sleep timer setting |
|
|
Timer playback | Timer playback | |
(record) setting | (record) start |
|
1 minute - 2 hours |
| Desired time |
Sleep operation | will | End time |
automatically stop. |
| |
To cancel the sleep operation:
If the unit enters the
①Press the TIMER/DELETE button.
②Turn the jog dial so that the "SLEEP OFF" display appears.
③Within 10 seconds, press the ENTER button.
●The sleep operation will be cancelled. ("SLEEP" will go off.)
Notes:
●Once the sleep time is set, it will remain the same duration until the setting is changed.
●The sleep functions of this unit cannot be used to control equipment connected to this unit. You must use the sleep functions of the other equipment, if it has them.
Notes:
●When the CD or MD is played to the end, playback will stop before the stop time.
If you wish to play to the stop time, set repeat play for the CD or MD.
●Timer recording starts about 15 seconds before the start time.
43
