YO <P=001>
(Continued)
■Loading and playing CDs
3
12 cm (5")
8 cm (3")
5
1
2,4
1
5
1 Press the CD ■ button.
●The power will be turned on automatically, and the unit will enter the CD mode.
2 Press the CD 7 button to open a disc tray.
●Press one of the CD 1 0 - CD 3 0 buttons depending on which disc tray you want to load.
●You cannot open more than one disc tray at the same time.
3 Place the CD(s) on the disc tray, label side up.
●Be sure to place 8 cm (3") disc in the middle of the disc holder.
Caution:
Do not place more than one CD in any tray position.
This can damage the player and the CDs.
4 Press the CD 7 button of the disc tray that is open.
●Repeat steps 2 - 3 to load one disc each into the second and third disc trays.
●The total number of tracks and the total playing time on the selected disc will be displayed. At this time, the blue frame that corresponds to the selected disc tray will light up.
●The music schedule will be displayed only for the number of tracks on the disc.
●If the CD contains more than 21 tracks, "C" will appear.
5 Press the CD 0 6 button.
●Playback will begin from track 1 on the disc you have selected to play.
●After the disc finishes playing, the next disc will automatically play.
●When there is no CD in one of the disc 1 - 3 trays, that tray will be skipped and the next CD will be played.
●When the CD 0 6 button is pressed after a track is selected (whilst the blue frame mark of Disc 1 is lit), the track will be played.
If you press the CD 0 6 button and then the CD 2 0 button, discs 2 and 3 will be played.
If the CD 3 0 button is pressed, only disc 3 will be played.
●When the last track on the third disc has finished playing, the unit will stop automatically.
The blue frame that corre- sponds to the selected CD tray will light up.
Music schedule | More tracks indicator | ||
|
|
|
|
|
|
|
|
Total number of | Total playing time |
tracks |
|
The tray with a CD will be displayed.
To interrupt playback:
Press the CD 0 6 button.
Press the CD 0 6 button to resume playback from the same point.
To stop playback:
Press the CD ■ button.
To remove the CDs:
Whilst in the stop mode, press the 7 button.
●When playing back a CD, it is possible to remove or change the other two discs.
After use:
Press the
10
