Using the rotary commander

By rotating the control (the SEEK/AMS control)

The rotary commander works by pressing buttons and/or rotating controls.

By pressing buttons(the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

TUNER ÷CD

Pressing (MODE) changes the operation in the following ways;

• Tuner: FM1 nFM2 nMW nLW

Rotate the control momentarily and release it to:

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to find a specific station.

By pushing in and rotating the control (the PRESET/DISC control)Push in and rotate the control to: •Receive the stations memorised on the

number buttons.

16