Changing the sound and display settings

The following items can be set: •CLOCK (page 6).

•CT (Clock Time) (page 15).

•D.INFO (Dual Information) - to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•DIM (Dimmer)-to change the brightness of the display.

—Select “ON” to dim the display. •BEEP - to turn on or off the beeps.

•RM (Rotary Commander) - to change the operative direction of the controls of the rotary commander.

—Select “NORM” to use the rotary commander as the factory-set position.

—Select “REV” when you mount the rotary commander on the right side of the steering column.

•M.DSPL (Motion Display) - to turn the motion display on or off.

Note

If you connect an optional power amplifier and do not use the buit-in amplifier, the beep sound will be disabled.

1 Press (SHIFT).2 Press (2) (SET UP) repeatedly until the desired item appears.

Each time you press (2) (SET UP), the item changes as follows:

CLOCK nCT nD.INFO* nDIM nBEEP n RM nM.DSPL

*When no CD or MD is playing, this item will not appear.

Note

The displayed item will differ depending on the source.

3 Press (4) (n) to select the desired setting (Example: ON or OFF).

4 Press (SHIFT).

After the mode setting is complete, the display returns to normal playback mode.

18