Memorizing only the desired stations
You can store up to 6 stations on each band (a total of 18 for FM I, FM II, and FM III, and 6 for AM) in the order of your choice.
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Push the SEEK/AMS control up or down to tune in the station that you want to store on the number button.
4 Press and hold the desired number button ((1) to (6)) until “MEM” appears. The number button indication appears in the display.
Note
If you try to store another station on the same number button, the previously stored station will be erased.
Receiving the memorized stations
1 Press (SOURCE) repeatedly to select the tuner.
2 Press (MODE) repeatedly to select the band.
3 Press the number button ((1) to (6)) on which the desired station is stored.
If you cannot tune in a preset station
Push and release the SEEK/AMS control up or down to search for the station (automatic tuning).
Scanning stops when the unit receives a station. Push the SEEK/AMS control up or down repeatedly until the desired station is received.
Note
If the automatic tuning stops too frequently, press (SENS/BTM) repeatedly until “LCL” (local seek mode) is displayed. Only the stations with relatively strong signals will be tuned in.
Tip
If you know the frequency of the station you want to listen to push the SEEK/AMS control up or down and hold until the desired frequency appears (manual tuning).
If FM stereo reception is poor
—Monaural Mode
Press (SENS/BTM) repeatedly until “MONO” appears.
The sound improves, but becomes monaural (“ST” disappears).
To return to the normal mode, press again until “MONO” disappears.
Changing the display item
Each time you press (DSPL), the items changes as follows:
z Frequency | z Clock |
MOTION DISPLAY* Z
*All the above items are scrolled in the display one by one in order.
9