ESEEK
CD:
To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold).
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
FDisc slot
To insert the disc (label side up), playback starts.
GZ (eject) button
To eject the disc.
H 
(front panel release) button 4
IAUX input jack 12
To connect a portable device.
JReceptor for the card remote commander
KRESET button (located behind the front panel) 4
LSENS/BTM button
To improve weak reception: LOCAL/MONO (press); start the BTM function (press and hold).
MEQ3 (equalizer) button 11
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM or OFF).
NSOURCE button
To power on; change the source (Radio/CD/ AUX).
OVolume control dial/select button 11
To adjust volume (rotate); select setup items (press and rotate).
PMODE button 8
To select the radio band (FM/MW/LW).
QDSPL (display)/DIM (dimmer) button 4, 8
To change display items (press); change the display brightness (press and hold).
RDisplay window
The following buttons on the card remote commander have also different buttons/functions from the unit.
ql < (.)/, (>) buttons
To control CD/Radio, the same as (SEEK)
w; VOL (volume) +/– button To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press again.
ws SEL (select) button To select items.
wd M (+)/m
To control CD, the same as (1)/(2)
wf SCRL (scroll) button 8
To scroll the display item.
wg Number buttons
To receive stored stations (press); store stations (press and hold).
*1 When an ATRAC CD is played.
*2 When an MP3/WMA is played.
Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 14.
7