ESEEK –/+ buttons

CD:

To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold).

Radio:

To tune in stations automatically (press); find a station manually (press and hold).

FDisc slot

To insert the disc (label side up), playback starts.

GZ (eject) button

To eject the disc.

H (front panel release) button 4

IAUX input jack 12

To connect a portable audio device.

JReceptor for the card remote commander

KRESET button (located behind the front panel) 4

LSENS/BTM button 8

To improve weak reception: LOCAL/MONO (press); start the BTM function (press and hold).

MEQ3 (equalizer) button 11

To select an equalizer type (XPLOD,

VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM or OFF).

NSOURCE button

To power on; change the source (Radio/CD/ MD*1/AUX).

OVolume control dial/select button 11

To adjust volume (rotate); select setup items (press and rotate).

PMODE button 8, 12

To select the radio band (FM/MW/LW)/ select the unit*6.

QDSPL (display)/DIM (dimmer) button 4, 8

To change display items (press); change the display brightness (press and hold).

RDisplay window

The following buttons on the card remote commander have also different buttons/functions from the unit.

ql < (.)/, (>) buttons

To control CD/Radio, the same as (SEEK) –/+ on the unit.

w; VOL (volume) +/– button To adjust volume.

wa ATT (attenuate) button

To attenuate the sound. To cancel, press again.

ws SEL (select) button To select items.

wd M (+)/m (–) buttons

To control CD, the same as (1)/(2) –/+ on the unit.

wf SCRL (scroll) button 8

To scroll the display item.

wg Number buttons

To receive stored stations (press); store stations (press and hold).

*1 When an MD changer is connected.

*2 When an ATRAC CD is played.

*3 When an MP3/WMA is played.

*4 If the changer is connected, the operation is different, see page 12.

*5 When playing back on this unit.

*6 When a CD/MD changer is connected.

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

Tip

For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 15.

7