Fuse replacement

 

3Pull out the release keys to remove the

When replacing the fuse, be

 

protection collar.

sure to use one matching the

 

 

amperage rating stated on the

 

 

original fuse. If the fuse blows,

 

 

check the power connection and

 

 

replace the fuse. If the fuse

 

 

blows again after replacement,

 

 

there may be an internal

 

 

malfunction. In such a case,

Fuse (10A)

 

consult your nearest Sony

2 Remove the unit.

 

dealer.

 

Cleaning the connectors

 

1Insert both release keys simultaneously

 

until they click.

The unit may not function properly if the connectors

 

between the unit and the front panel are not clean. In

 

order to prevent this, detach the front panel (page 5)

Hook facing

and clean the connectors with a cotton swab. Do not

inwards.

apply too much force. Otherwise, the connectors may be damaged.

2Pull the release keys to unseat the unit.

Main unit

Back of the front

 

panel

Notes

•For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.

•Never touch the connectors directly with your fingers or with any metal device.

3Slide the unit out of the mounting.

Removing the unit

1Remove the protection collar.

1Detach the front panel (page 5).

2Engage the release keys together with the protection collar.

Orient the release keys as shown.

15