EN
6
Locating a specific point in a track
— Manual Search
During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point.
SEEK/AMS
To search forward
To search backward
Note
If “ 
” or “ 
” appears in the display, that means you have reached the beginning or the end of the disc and you cannot go any further.
Playing a CD in various modes
You can play CDs in various modes:
•INTRO (Intro Scan) lets you play the first 10 seconds of all the tracks.
•REP (Repeat Play) repeats the current track.
•SHUF (Shuffle Play) plays all the tracks in random order.
1 Press (SHIFT).
Every time you press (SHIFT), only the items you can select light up.
SET UP PLAY MODE
SHIFT | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
2 Press (3) (PLAY MODE) repeatedly until the desired play mode appears.
Each time you press (3) (PLAY MODE), the item changes as follows:
INTRO nREP nSHUF
CD
INTROOFF
PLAY MODE
3 Press (4) (n) to select “ON.” Playback starts.
CD | INTRO |
|
INTROON
PLAY MODE
To go back to the normal playback mode, select “OFF” in step 3 above.
Radio
Memorizing stations automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 10 stations on each band (FM1, FM2 and AM).
Caution
When tuning in the station while driving, use Best Tuning Memory to prevent accidents.
1 Press (SOURCE) repeatedly to select the desired band (FM1, FM2 or AM).
2 Press (SHIFT), then press (6) (BTM). The unit stores stations in the order of their frequencies on the number buttons.
Notes
•The unit does not store stations with weak signals. If only a few stations are received, some number buttons remain empty.
•When a number is indicated in the display, the unit starts storing stations from the one currently displayed.
Memorizing only the desired stations
You can store up to 10 stations on each band (20 for FM1 and FM2, 10 for AM) in the order of your choice.
1 Press (SOURCE) repeatedly to select the desired band.
2 Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button.
3 Keep the desired number button ((1) to
(10)) pressed for two seconds until you hear a beep tone.
The number button indication appears in the display.
Note
If you try to store another station on the same number button, the previously stored station will be erased.
Actual total number: | Sony |
|
|
