Press (SHIFT).

Adjusting the sound characteristics

You can adjust the bass, treble, balance, and fader.

You can store the bass and treble levels independently for each source.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nSUB (subwoofer volume)

nBAS (bass) nTRE (treble)

nBAL (left-right) nFAD (front-rear)

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selecting the item. (After three seconds, the dial function reverts to volume control.)

Attenuating the sound

Press (ATT) on the optional rotary commander or wireless remote.

“ATT-ON” flashes momentarily.

To restore the previous volume level, press (ATT) again.

Tip

The unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

The following items can be set: •CLOCK (page 7).

•D.INFO (Dual Information) - to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•AMBER/GREEN - to change the illumination color to amber or green.

•DIM (Dimmer) - to change the brightness of the display.

—Select “ON” to dim the display. •BEEP - to turn on or off the beeps.

•RM (Rotary Commander) - to change the operative direction of the controls of the rotary commander.

—Select “NORM” to use the rotary commander as the factory-set position.

—Select “REV” when you mount the rotary commander on the right side of the steering column.

•HPF (High Pass Filter).

•LPF (Low Pass Filter).

•M.DSPL (Motion Display) - to turn the motion display on or off.

•A.SCRL (Auto Scroll) (page 8, 18).

Note

If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be disabled.

1

2 Press (3) (SET UP) repeatedly until the desired item appears.

Each time you press (3) (SET UP), the item changes as follows:

CLOCK nD.INFO* nAMBER/GREEN nDIM nBEEP nRM nHPF* nLPF* nM.DSPL n A.SCRL*

*When no CD or MD is playing,this item will not appear.

Note

The displayed item will differ depending on the source.

3 Press (5) (n) to select the desired setting (Example: ON or OFF).

4 Press (SHIFT).

After the mode setting is complete, the display returns to normal playback mode.

15