Displaying the station name
Press (DSPL) during radio reception.
Each time you press (DSPL), the item changes as follows:
z Station name* | z Frequency |
Clock Z
*If the station name of a station is not stored, “NO NAME” appears in the display for one second.
Erasing the station name
1 Tune in any station and press (LIST) for two seconds.
2 Press (DSPL) for two seconds.
3 Rotate the dial to select the name that you want to erase.
4 Press (6) (ENTER) for two seconds. The name is erased.
Repeat steps 3 and 4 if you want to erase other names.
5 Press (LIST) for two seconds.
The unit returns to the normal radio reception mode.
Locating a station by
name —
1 Press (LIST) momentarily.
The name assigned to the station currently playing appears in the display.
2 Press (LIST) repeatedly until you find the desired station.
3 Press (6) (ENTER) to tune in the desired station.
Note
Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. To turn off the display, press (DSPL).
12