Adjusting the frequency of the subwoofer(s)

— Low Pass Filter (LPF)

To match the characteristics of the connected subwoofer(s), you can cut out the unwanted high and middle frequency signals entering the subwoofer(s).

1 Press (SOURCE) to select a source (radio,

CD, or MD).

2 Press (SHIFT), then press (3) (SET UP) repeatedly until “LPF” appears.

3 Press (5) (n) or (2) (N) repeatedly to select desired setting.

With Optional Equipment

CD/MD Unit

This unit can control a maximum of seven external CD/MD units in this configuration: CD unit - maximum of five

MD unit - maximum of five.

Any combination up to seven will work.

If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc.

Playing a CD or MD

Each time you press (5) (n) or (2) (N), the cut-off frequency in the display changes as follows:

LPF OFF ÷LPF 80 HZ ÷LPF 120 HZ

4 Press (SHIFT).

When the frequency setting is complete, the display returns to the normal playback mode.

1 Press (SOURCE) repeatedly to select CD or MD.

2 Press (MODE) until the desired unit appears.

CD/MD playback starts.

When a CD/MD unit is connected, all the tracks play from the beginning.

Changing the display item

Each time you press (DSPL) during CD, CD TEXT disc, or MD playback, the item changes as follows:

$

Track number/

Elapsed playback time

$

Disc name*1/Artist name*2

$

Track name*3

$

Clock

*1 If you have not labeled the disc or if there is no disc name prerecorded on the MD, “NO NAME” appears in the display.

*2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name.)

*3 If the track name of a CD TEXT disc or MD is not prerecorded, “NO NAME” appears in the display.

17