CD/MD Unit
This unit can control a maximum of seven external CD/MD units in this configuration: CD unit - maximum of five
MD unit - maximum of five.
Any combination up to seven will work.
If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc.
Playing a CD or MD
1 Press (SOURCE) repeatedly to select CD or MD.2 Press (MODE) until the desired unit appears.CD/MD playback starts.
When a CD/MD unit is connected, all the tracks play from the beginning.
Changing the display item
Each time you press (DSPL) during CD, CD TEXT, or MD playback, the item changes as follows:
$
Track number/
Elapsed playback time
$
Disc name*1/Artist name*2
$
Track name*3
$
Clock
*1 If you have not labelled the disc or if there is no disc name prerecorded on the MD,
“NO D.Name” appears in the display.
*2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name.)
*3 If the track name of a CD TEXT disc or MD is not prerecorded, “NO T.Name” appears in the display.
You can label CD and CD TEXT discs with a personalised name using the disc memo function. Refer to “Labelling a CD” (page 24). However, if you use personalised labels, they will always take priority over the original CD TEXT information when such information is displayed.
Tip
If you want to display the original CD TEXT information after labeling the CD TEXT disc with a personalized name, press (SHIFT), then (5) (n).
After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds.
In the Motion Display mode, all the above items are scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See ”Changing the sound and display settings” on page 20).
22