Each time you press (DSPL) during CD or CD TEXT disc playback, the item changes as follows:
$
Track number/
Elapsed playback time
$
Disc memo name
$
Track name*
$
Clock
*If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc.
Erasing the disc memo1
2
3
4
5 Rotate the dial to select the name you want to erase.6 Press (6) (ENTER) for two seconds. The name is erased.Repeat steps 5 and 6 if you want to erase other names.
7 Press (PTY/LIST) for two seconds. The unit returns to normal CD playback mode.
Note
When a personalised label is erased, the original CD TEXT information will appear in the display.
Locating a disc by name
—You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to “Labelling a CD” (page 24).
1 Press (PTY/LIST).
The name assigned to the current disc appears in the display.
When you assign a disc memo label to a CD TEXT disc, it takes priority over the original CD TEXT information.
2 Press (PTY/LIST) repeatedly until you find the desired disc.3 Press (6) (ENTER) to play the disc.Notes
•After a disc name has been displayed for five seconds, the display returns to normal playback mode. To turn off the display, press (DSPL).
•The track names are not displayed during MD or CD TEXT disc playback.
•If there are no discs in the magazine, “NO Disc” appears in the display.
•If a disc has not been assigned a custom file, “********” appears in the display.
•If the disc information has not been read by the unit, “?” appears in the display. To load a disc, first press the number button, then choose the disc that has not been loaded.
•There are also some letters which cannot be displayed (during MD or CD TEXT disc playback).
25