Start playing the disc you want to label.
Labeling a CD — Disc Memo

(For a CD unit with the custom file function)

You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 13) and select the specific tracks for playback (page 14).

1

2 Press (MENU), then press either side of (DISC/PRST) repeatedly until “NAME EDIT” appears.

3 Press (ENTER).

Name edit mode

4 Enter the characters.

1Press the (+) side of (DISC/PRST) repeatedly to select the desired characters.

(A t B t C t ··· Z t 0 t 1 t 2 t

··· 9 t + t – t * t / t \ t > t < t . t _ )

If you press the (–) side of (DISC/PRST) repeatedly, the characters will appear in reverse order.

If you want to put a blank space between characters, select “_” (under- bar).

2Press the (+) side of (SEEK/AMS) after locating the desired character.

The next character flashes.

If you press the (–) side of (SEEK/AMS), the previous character flashes.

3Repeat steps 1 and 2 to enter the entire name.

5 To return to normal CD play mode, press

(ENTER).

Tips

•To erase or correct a name, enter “_” (under-bar) for each character.

•There is another way to start labeling a CD. Press (LIST) for two seconds instead of steps 2 and 3. You can also complete the operation by pressing (LIST) for two seconds instead of step 5.

Displaying the disc memo

Press (DSPL) during CD or CD TEXT disc playback.

Each time you press (DSPL) during CD or CD TEXT disc playback, the item changes as follows:

V

Disc number*1/Track number/

Elapsed playback time

V

Disc memo name

V

Track name*2

*1 While an optional CD unit is connected.

*2 If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc.

Note

Do not use the Custom file feature while driving, or perform any other function which could divert your attention from the road.

12