Changing the sound and display settings

The following items can be set:

SET (setting)

•CLOCK (page 8)

•BEEP — to turn the beeps on or off.

•RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.

—Select “NORM” to use the rotary commander as the factory-set position.

—Select “REV” when you mount the rotary commander on the right side of the steering column.

DIS (display)

•D.INFO (Dual Information) — to display the clock and the play mode at the same time (ON).

•AMBER/GREEN*1 — to change the illumination color to amber or green.

•M.DSPL (Motion Display) — to turn the motion display on or off.

•A.SCRL (Auto Scroll) (page 10)

P/M

•HPF (High pass filter for the pre-output)*2— to select the roll off frequency of the pre- output.

•SUB LPF (Low pass filter for the subwoofer output)*2 — to select the roll off frequency of the subwoofer output.

•LOUD (Loudness) — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced.

*1 CDX-C5055 only *2 CDX-C7050X only

Note

If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be disabled.

1 Press (MENU).

2 Press either side of (DISC/PRST) repeatedly until the desired item appears.

Each time you press the (–) side of (DISC/PRST), the item changes as follows:

CLOCK t BEEP t RM t D.INFO t AMBER/ GREEN*1 t M.DSPL t A.SCRL*2

*1 CDX-C5005 only

*2 When no CD or MD is playing, this item will not appear.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“SET”, “DIS”, “P/M” (play mode), and “EDT” (edit mode)) by pressing either side of (DISC/PRST) for two seconds.

3 Press the (+) side of (SEEK/AMS) to select the desired setting (Example: ON or OFF) or press either side of (SEEK/AMS) repeatedly to select the frequency (Example: off, 80 Hz, 120 Hz).

4 Press (ENTER).

After the mode setting is completed, the display returns to normal play mode.

21