Erasing the disc memo1 Press (SOURCE) repeatedly to select CD.2 Press (MODE) repeatedly to select the CD unit.3 Press (PTY/LIST) for two seconds.4 Press (DSPL) for two seconds.5 Rotate the dial to select the name you want to erase.6 Press (6) (ENTER) for two seconds. The name is erased.

Repeat steps 5 and 6 if you want to erase other names.

7 Press (PTY/LIST) for two seconds. The unit returns to normal CD playback

EN mode.

Note

When the personalized label is erased, the original CD TEXT information will appear in the display.

Locating a disc by nameList-up (CD unit with the custom file function or MD unit)

You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD” (page 29).

1 Press (PTY/LIST) momentarily.

The name assigned to the current disc appears in the display.

DISC

ENTER

When you assign a disc memo label to a CD TEXT disc, it takes priority over the original CD TEXT information.

2 Press (PTY/LIST) repeatedly until you find the desired disc.3 Press (6) (ENTER) to play back the disc.

Notes

After a disc name has been displayed for five seconds, the display goes back to normal playback mode. To turn off the display, press

(DSPL).

The track names are not displayed during MD or CD TEXT disc playback.

If there are no discs in the magazine, “NO Disc” appears in the display.

If a disc has not been assigned a custom file, “********” appears in the display.

If the disc information has not been read by the unit, “?” appears in the display. To load the disc, first press the number button, then choose the disc that has not been loaded.

The information appears only in upper case. There are also some letters which cannot be displayed (during MD or CD TEXT disc playback).

30