Adjusting the sound characteristics

You can adjust the bass, treble, balance and fader.

Each source can store the bass and treble levels respectively.

1 Select the item you want to adjust by pressing (SOUND) repeatedly.

VOL (volume) nSUB (subwoofer volume)

nBAS (bass) nTRE (treble)

nBAL (left-right) nFAD (rear-front)

2 Adjust the selected item by rotating the dial.

Adjust within three seconds after selecting the item. (After three seconds, the dial functions as the volume control.)

Attenuating the soundPress (ATT) on the rotary commander or wireless remote.

“ATT on” flashes momentarily.

To restore the previous volume level, press (ATT) again.

Tip

The unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

You can set: •Clock (page 7).

•CT (Clock Time) (page 21).

•D.Info (Dual Information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•Amber/Green to change the illumination colour to amber or green.

•Dimmer to change the brightness of the display.

—Select “Auto” to dim the display only when you turn the lights on.

—Select “on” to dim the display. •Contrast to adjust the contrast if the

indications in the display are not recognizable because of the unit‘s installed position.

•Beep to turn on or off the beeps.

•RM (Rotary Commander) to change the operative direction of the controls of the rotary commander.

—Select “norm” to use the rotary commander as the factory-set position.

—Select “rev” when you mount the rotary commander on the right side of the steering column.

•Loud (Loudness) to enjoy bass and treble even at low volume. The bass and treble will be reinforced.

•LPF (Low Pass Filter) (page 24)

•A.Scrl (Auto Scroll) (page 9, 25)

1 Press (SHIFT).

2 Press (3) (SET UP) repeatedly until the desired item appears.

Each time you press (3) (SET UP), the item changes as follows:

Clock nCT nD.Info* nAmber/Green n Dimmer nContrast nBeep nRM nLoud*

nLPF* nA.Scrl*

*When you have not tune the station or there is no CD/MD being played, these items will not appear.

Note

The displayed item will differ depending on the source.

continue to next page n

EN

Functions Other

23