You can label CD and CD TEXT discs with a personalized name using the disc memo function, refer to “Labeling a CD” (page 29). However, if you use personalized labels, they will always take priority over the original CD TEXT information when such information is displayed.

Tips

∙If the name of the MD or CD TEXT disc is too long, you can scroll it across the display by pressing (SHIFT), then (2) (N).

∙If you want to display the original CD TEXT information after labelling the CD TEXT disc with

a personalized name, press (SHIFT) , then (5) (n).

Automatically scrolling a disc name

— Auto Scroll

If the disc name/artist name or track name on a CD TEXT disc or MD exceeds 10 characters and the Auto Scroll function is on, automatically scrolls on the display as follows:

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

If you press (DSPL) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off.

1 During playback, press (SHIFT).

2 Press (3) (SET UP) repeatedly until “A.Scrl” appears.

3 Press (5) (n) to select “A.Scrl on.”

4 Press (SHIFT)

To cancel Auto Scroll, select “A.Scrl off” in step 2 above.

Note

For some CD TEXT discs with extremely many characters, the following cases may happen:

—Some of the characters are not displayed.

—Auto Scroll does not work.

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down once for each track you want to skip.

To locate succeeding tracks

To locate preceding tracks

Locating a specific point in a track

—Manual Search

During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point.

To search forward

To search backward

Locating a disc by disc number—Direct Disc SelectionPress the number button that corresponds with the desired disc number.

The desired disc in the current unit begins playback.

Scanning the tracks— Intro Scan

You can play the first 10 seconds of all the tracks on the current disc.

1 During playback, press (SHIFT), then press (4) (PLAY MODE) repeatedly until “Intro” appears.

2 Press (5) (n) to select “Intro on.” Intro Scan starts.

3 Press (SHIFT).

To go back to normal playback mode, select “Intro off” in step 2 above.

EN

Unit Functions/CD/MD Other

25