Press (ENTER).

Storing station names

— Station Memo

You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station.

Storing the station names

1 Tune in a station whose name you want to store.

2 Press (MENU), then press either side of (DISC/PRESET) repeatedly until “NAMEEDIT” appears.

3 Press (ENTER).

4 Enter the characters.

1Press the (+)*1 side of (DISC/PRESET) repeatedly to select the desired character.

A t B t C … t 0 t 1 t 2 … t + tt * t_*2 t A

*1 For reverse order, press the (–) side of

(DISC/PRESET).

*2 (blank space)

2Press the (+) side of (SEEK) after locating the desired character.

If you press the (–) side of (SEEK), you can move back to the left.

3Repeat steps 1 and 2 to enter the entire name.

5 Press (ENTER).

Tips

Simply overwrite or enter “_” to correct or erase a name.

There is another way to start storing station names: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5.

Displaying the station name

Switch the display item to frequency or station name*.

To

Press

Switch display

(DSPL) during radio

item

reception

*If the station name is not stored, “NO NAME” appears in the display for one second.

Erasing the station name

1 During radio reception, press (MENU), then press either side of (DISC/PRESET) repeatedly until “NAME DEL” appears.

2

3 Press either side of (DISC/PRESET) repeatedly to select the station whose name you want to erase.

4 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 3 to 4 if you want to erase other names.

5 Press (MENU) twice.

The unit returns to normal radio reception mode.

Note

If you have already erased all of the station names, “NO DATA” appears in step 4.

15