Setting the equalizer

You can select an equalizer curve for seven music types (VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM, and XPLOD).

You can store and adjust the equalizer settings for frequency and level.

Selecting the equalizer curve

1 Press (SOURCE) to select a source (radio, CD, or MD).

2 Press (EQ7) repeatedly until the desired equalizer curve appears.

Each time you press (EQ7), the item changes.

To cancel the equalizing effect, select “OFF.”

After 3 seconds, the display returns to the normal playback mode.

Adjusting the equalizer curve

1 Press (MENU).

2 Press either side of (DISC/PRESET) repeatedly until “EQ7 TUNE” appears, then press (ENTER).

3 Press either side of (SEEK) to select the desired equalizer curve, then press (ENTER).

Each time you press (SEEK), the item changes.

4 Select the desired frequency and level.

1Press either side of (SEEK) to select the desired frequency.

Each time you press (SEEK), the frequency changes.

62 Hz y157 Hz y396 Hz

y1.0 kHz y2.5 kHz y6.3 kHz y16.0 kHz

2Press either side of (DISC/PRESET) to adjust the desired volume level.

The volume level is adjustable by 1 dB steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve, press (ENTER) for two seconds.

5 Press (MENU) twice.

When the effect setting is complete, the normal playback mode appears.

20