Setting the clock

The clock uses a 12-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side of (DISC/PRESET) repeatedly until “CLOCK” appears.

CD PlayerCD/MD Unit (optional)

In addition to playing a CD with this unit, you can also control external CD/MD units.

Note

If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc.

1Press (ENTER).

The hour indication flashes.

2Press either side of (DISC/PRESET) to set the hour.
3Press the (+) side of (SEEK).

The minute indication flashes.

4Press either side of (DISC/PRESET) to set the minute.
2 Press (ENTER).

The clock starts. After the clock setting is completed, the display returns to normal play mode.

Tip

When D.INFO mode is set to ON, the time is always displayed (page 18).

Playing a disc

(With this unit)
1 Press (OPEN) and insert the disc (labelled side up).
2 Close the front panel.

Playback starts automatically.

If a disc is already inserted, press (SOURCE) repeatedly until “CD” appears to start playback.

To

Press

Stop playback

(OFF)

Eject the disc

(OPEN) then Z

Skip tracks

(SEEK) (./>)

– Automatic

[once for each track]

Music Sensor

 

Fast-forward/

(SEEK) (m/M)

reverse

[hold to desired point]

Manual Search

Notes

When the last track on the disc is over, playback restarts from the first track of the disc.

With optional unit connected, playback of the same source will continue on to the optional CD/ MD unit.

continue to next page t

9