Press (ENTER).

Storing station names

—Station Memo

You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station.

Storing the station names1 Tune in a station whose name you want to store.

2 Press (MENU), then press either side of (DISC/PRESET) repeatedly until “Name Edit” appears.

3 Press (ENTER).

4 Enter the characters.

1Press the (+)*1 side of (DISC/PRESET) repeatedly to select the desired character.

A t B t C ... t 0 t 1 t 2 ... t +

t– t * ... t *2 t A

*1 For reverse order, press the (–) side of

(DISC/PRESET).

*2 (blank space)

2Press the (+) side of (SEEK) after locating the desired character.

If you press the (–) side of (SEEK), you can move back to the left.

3Repeat steps 1 and 2 to enter the entire name.

5 Press (ENTER).

Tips

•Simply overwrite or enter “ ” to correct or erase a name.

•There is another way to start storing station names: Press (LIST) for 2 seconds instead of performing steps 2 and 3. You can also complete the operation by pressing (LIST) for 2 seconds instead of step 5.

Erasing the station name

1 During radio reception, press (MENU), then press either side of (DISC/PRESET) repeatedly until “Name

Del” appears.

2

3 Press either side of (DISC/PRESET) repeatedly to select the station whose name you want to erase.

4 Press (ENTER) for 2 seconds.

The name is erased.

Repeat steps 3 to 4 if you want to erase other names.5 Press (MENU) twice.The unit returns to normal radio reception mode.

Note

If you have already erased all of the station names, “NO Data” appears in step 4.

15