Adjusting the sound characteristics

You can adjust the bass, treble, balance, fader, and subwoofer volume.1 Press (SOUND) repeatedly to select the desired item.Each time you press (SOUND), the item changes as follows:BAS (bass) t TRE (treble) tBAL (left-right) t FAD (front-rear) tSUB (subwoofer volume)2 Press the volume +/– button to adjust the selected item.

Note

Adjust within 3 seconds after selecting the item.

Tips

•When adjusting with the card remote commander, press (SOUND) repeatedly and then press

(SEEK) (+) or (SEEK) (–).

•When adjusting with the rotary commander, press (SOUND) repeatedly and then rotate the VOL control.

Changing the BBE MP setting

The BBE MP process effectively adds warmth and provides clear CD quality sound even from heavily compressed MP3 material.

During playback on this unit, press(5)(BBE MP) to select “BBE MP-ON.”To cancel the BBE MP, select “BBE MP-OFF.”

Note

The BBE MP function is available only when playing back on this unit (when playing back on the optional unit, BBE MP is not available).

Tip

You can change the BBE MP setting, only when playing back on this unit.

Quickly attenuating the sound

Press (ATT).After “ATT-ON” momentarily appears, “ATT” appears in the display.To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

20