Press (DISC/PRESET) (+) or (DISC/PRESET) (–) repeatedly to select “AUX LVL.”
Press (ENTER).

(With the card remote commander)

Adjusting the volume levelYou can adjust the volume for each connected audio equipment.

1 Press (MENU).

2

3

4 Press (DISC/PRESET) (+) or (DISC/PRESET) (–) repeatedly to select a desired volume level.

The volume level is adjustable in 1 dB steps from –6 dB to +6 dB.

5 Press (ENTER).

(With the card remote commander)

To deactivate auxiliary equipment in the source display1 Press (OFF).CD/MD playback or radio reception stops.2 Press (MENU).

3 Press (DISC/PRESET) (+) or (DISC/PRESET) (–) repeatedly until “AUX-A-ON” appears.

4 Press (SEEK) (+) to select “AUX-A-OFF.”5 Press (MENU).To restore the indication, select “AUX-A-ON.”

24

Additional Information

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.

Fuse (10 A)

Warning

Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

Cleaning the connectors

The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel (page 9) and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged.

Main unit

Back of the front panel

Notes

•For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.

•Never touch the connectors directly with your fingers or with any metal device.