•Store the correct frequency in the memory.
•The broadcast signal is too weak.
The stations cannot be received. The sound is hampered by noises.
•Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s aerial booster (only when your car has
•Check the connection of the car aerial.
•The auto aerial will not go up.
tCheck the connection of the power aerial control lead.
•Check the frequency.
•When the DSO mode is on, the sound is sometimes hampered by noises.
tSet the DSO mode to “OFF” (page 23).
Automatic tuning is not possible.•The local seek mode is set to “ON.” tSet the local seek mode to “OFF”
•The broadcast signal is too weak. tPerform manual tuning.
The “STEREO” indication flashes.•Tune in the frequency accurately.
•The broadcast signal is too weak.
tSet the monaural reception mode to “ON” (page 21).
A programme broadcast in stereo is heard in monaural.The unit is in monaural reception mode.
tCancel monaural reception mode (page 21).
Interference occurs during FM reception.The wide mode is selected.
tSet the IF mode to “IF AUTO” (page 21).
Error displays/Messages
Error displays(For this unit and optional CD/MD changers)The following indications will flash for about 5 seconds, and an alarm sound will be heard.
BLANK*1No tracks have been recorded on an MD.*2
tPlay an MD with recorded tracks on it.
ERROR*1•A CD is dirty or inserted upside down.*2 tClean or insert the CD correctly.
•A CD/MD cannot play because of some problem.
tInsert another CD/MD.
FAILUREThe connection of speakers/amplifiers is incorrect.
tSee the installation guide manual of this model to check the connection.
HI TEMPThe ambient temperature is more than 50°C.
tWait until the temperature goes down below 50°C.
NO DISCNo disc is inserted in the CD/MD unit.
tInsert discs in the CD/MD unit.
NO MAGThe disc magazine is not inserted in the CD unit.
tInsert the magazine in the CD unit.
28