Getting Started
Resetting the unit
Before operating the unit for the first time, or after replacing the car battery or changing the connections, you must reset the unit.
Detach the front panel and press the RESET button with a pointed object, such as a
RESET button
Note
Pressing the RESET button will erase the clock setting and some stored contents.
Setting the clock
The clock uses a
(With the card remote commander)
1Press (MENU).
2Press M or m repeatedly until “Clock
Adjust” appears.
3Press (ENTER).
4Press M or m to set the hour and minute.
To move the digital indication, press < or
,.
5Press (ENTER).
The clock starts.
To display the clock during playback/reception, set “Clock on” (page 11).
Detaching the front panel
You can detach the front panel of this unit to prevent theft.
Caution alarmIf you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the
1Press (OFF).
The unit is turned off.
2Press (OPEN).
The front panel is flipped down.
3Slide the front panel to the right, then gently pull out the left end of the front panel.
1
2
Notes
•Do not drop or put excessive pressure on the front panel and display window.
•Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray.
4