Changing the operative direction

The operative direction of controls is factory-set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Press (SOUND) for 2 seconds while pushing the VOL control.

Tip

You can also change the operative direction of these controls with the unit (page 21).

Adjusting the sound characteristics

You can adjust the bass, treble, balance, fader, and subwoofer volume.

1 Press (SOUND) repeatedly to select the desired item.

Each time you press (SOUND), the item changes as follows:

BASS (bass) t TREBLE (treble) t BALANCE (left-right) t

FADER (front-rear) t

SUB (subwoofer volume)

2 Adjust the level of a selected item by pressing < or ,.

After 3 seconds, the display returns to the normal play mode.

Note

Adjust within 3 seconds after selecting the item.

Tips

•When adjusting with the unit, press (SOUND) repeatedly and then rotate the volume control dial.

•When adjusting with the rotary commander, press (SOUND) repeatedly and then rotate the VOL control.

Quickly attenuating the sound

(With the rotary commander or the card remote commander)

Press (ATT).

“ATT-on” appears in the display momentarily.

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

20