Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music types (Xplod, VOCAL, CLUB, JAZZ, NEWAGE, ROCK, CUSTOM), and OFF (equalizer off).

You can store and adjust the equalizer settings for frequency and level.

You can store the EQ7 setting for each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a desired source.

2 Press (EQ7) repeatedly to select a desired equalizer curve.

Each time you press (EQ7), the item changes.

To cancel the equalizing effect, select “OFF.” After 3 seconds, the display returns to the normal play mode.

Adjusting the equalizer curve

1 Press (MENU).

2 Press M or m repeatedly until “EQ7 Tune” appears, then press (ENTER).

3 Press < or , to select the desired equalizer curve, then press (ENTER). Each time you press < or ,, the item changes.

4 Select the desired frequency and level.

1Press < or , to select the desired frequency.

Each time you press < or ,, the frequency changes as follows:

62Hz y 157Hz y 396Hz y 1.0kHz y 2.5kHz y 6.3kHz y 16kHz

2Press M or m to adjust the desired volume level.

The volume level is adjustable by 1 dB steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve, press (ENTER) for 2 seconds.

5 Press (ENTER).

After the effect setting is complete, the display returns to the normal play mode.

22