CD Player

CD/MD Unit (optional)

In addition to playing a CD with this unit, you can also control external CD/MD units.

Playing a disc

(With this unit)

1 Press (OPEN) on the unit and insert the disc (labelled side up).2 Close the front panel.Playback starts automatically.

If a disc is already inserted, press (SOURCE) repeatedly until “CD” appears to start playback.

To

Press

Pause*1(6) (PAUSE)
Stop playback

(OFF)

 

 

Eject the disc(OPEN) then Z on the unit

 

 

Skip tracks(SEEK) (</,)
– Automatic[once for each track]
Music Sensor

 

 

 

Fast-forward/

(SEEK) (</,)

reverse[hold to desired point]
– Manual Search

 

 

 

Skip albums*2(DISC) (M/m)

– Album selection

[hold to desired point]

 

 

*1 Pause is available only when playing back on this unit (when playing back on the optional unit, pause is not available). To cancel pause, press (6)

(PAUSE) again.

*2 Available only when an MP3 file is played.

To skip tracks continuously, press < or ,, then press again within about 1 second and hold.

Notes

Before playing a track, this unit reads all track and album information on the disc. Depending on the track structure, it may take more than a minute before playback begins. During this time, “Read” is displayed. Play will automatically start when reading is complete.

Depending on the condition of the disc, it may not play back (page 7, 8).

While the first/last track on the disc is playing, if < or , is pressed, playback skips to the last/first track of the disc.

When the last track on the disc is over, playback restarts from the first track of the disc.

If you play a high-bit rate MP3 file such as 320 kbps, sound may be intermittent.

12