Press (MENU).
SoundEQ7 Tune (page 27) — to adjust the equalizer curve.

HPF (High pass filter) — to select the cut-off frequency to “78Hz,” “125Hz” or “off.”

LPF (Low pass filter) — to select the cut-off frequency to “78Hz,” “125Hz” or “off.”

Loudness — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced.

AUX Level (page 29) — to adjust the volume level of connected auxiliary equipment.

Receive ModeAF on/off (Alternative frequencies) (page 19)Local on/off (Local seek mode) (page 17)Select “on” to only tune into stations with stronger signals.Mono on/off (Monaural mode) (page 17)Select “on” to hear FM stereo broadcast in monaural.Select “off” to return to normal mode.Regional on/off (page 20)

1

2 Press M or m repeatedly until the desired item appears.

3 Press < or , to select the desired setting (Example: “on” or “off”).

4 Press (ENTER).

After the mode setting is complete, the display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories by pressing M or m for 2 seconds.

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music types (Xplod, VOCAL, CLUB, JAZZ, NEWAGE, ROCK, CUSTOM), and OFF (equalizer off).

You can store and adjust the equalizer settings for frequency and level.You can store the EQ7 setting for each source.Selecting the equalizer curve1 Press (SOURCE) to select a desired source.2 Press (EQ7) repeatedly to select a desired equalizer curve.Each time you press (EQ7), the item changes.

To cancel the equalizing effect, select “OFF.” After 3 seconds, the display returns to the normal play mode.

26