Press (ENTER).
Press (MENU).

Connecting auxiliary audio equipment

The unit’s AUX IN (external audio input) terminal on this unit is also used as the BUS AUDIO IN (audio input) terminal.

You can listen to the sound from your car speakers by connecting optional Sony portable devices.

Note

If you connect an optional Sony CD/MD unit, you cannot connect any portable devices and “AUX” will not appear in the display as a source.

When you connect a Sony portable device and CD/ MD unit(s) at the same time, use the AUX IN selector.

Selecting auxiliary equipmentPress (SOURCE) repeatedly to select “AUX.”Adjusting the volume levelYou can adjust the volume for each connected audio equipment.

1

2 Press M or m repeatedly to select “AUX Level.”

3

4 Press M or m repeatedly to select a desired volume level.The volume level is adjustable in 1 dB steps from –6 dB to +6 dB.

5 Press (ENTER).

To deactivate auxiliary equipment in the source display1 Press (OFF).CD playback or radio reception stops.

2 Press (MENU).

3 Press M or m repeatedly until “AUX-A- on” appears.4 Press , to select “AUX-A-off.” 5 Press (MENU).To restore the indication, select “AUX-A-on.”

Additional Information

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.

Fuse (10 A)

Warning

Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit.

continue to next page t

29