Changing the operative direction

The operative direction of controls is factory-set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Press (SOUND) for 2 seconds while pushing the VOL control.

Tip

You can also change the operative direction of these controls with the unit (page 21).

Adjusting the sound characteristics

You can adjust the bass, treble, balance, fader, and subwoofer volume.

1 Press (SOUND) repeatedly to select the desired item.

Each time you press (SOUND), the item changes as follows:

BAS (bass) t TRE (treble) t

BAL (left-right) t FAD (front-rear) t

SUB (subwoofer volume)

2 Rotate the volume control dial to adjust the selected item.

Note

Adjust within 3 seconds after selecting the item.

Tips

•When adjusting with the card remote commander, press (SOUND) repeatedly and then press

(SEEK) (+) or (SEEK) (–).

•When adjusting with the rotary commander, press (SOUND) repeatedly and then rotate the VOL control.

Changing the BBE MP setting

The BBE MP process effectively adds warmth and provides clear CD quality sound even from heavily compressed MP3 material.

During playback on this unit, press

(5)(BBE MP) to select “BBEMP-ON.”

To cancel the BBE MP, select “BBEMP-OFF.”

Note

The BBE MP function is available only when playing back on this unit (when playing back on the optional unit, BBE MP is not available).

Tip

You can change the BBE MP setting only when playing back on this unit.

20