P/M (Play Mode)

LOCAL (Local Seek mode) (page 16)

Select “ON” to only tune into stations with stronger signals.

MONO (Monaural mode) (page 16)

Select “ON” to hear FM stereo broadcast in monaural.

Select “OFF” to return to normal mode.

IF AUTO/WIDE (page 16)

SND (Sound)

EQ7 TUNE (page 23) — to adjust the equalizer curve.

HPF (High pass filter) — to select the cut-off frequency to “78Hz,” “125Hz” or “OFF.”

LPF (Low pass filter) — to select the cut-off frequency to “78Hz,” “125Hz” or “OFF.”

LOUD (Loudness) — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced.

AUX LVL (page 24) — to adjust the volume level of connected auxiliary equipment.

1 Press (MENU).

2 Press (DISC/PRESET) (+) or (DISC/PRESET) (–) repeatedly until the desired item appears.

3 Press (SEEK) (+) or (SEEK) (–) to select the desired setting (Example: “ON” or “OFF”).

4 Press (ENTER).

After the mode setting is complete, the display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“SET,” “DSPL,” “P/M,” “SND,” and “EDIT”) by pressing (DISC/PRESET) (+) or (DISC/PRESET) (–) for 2 seconds.

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM and OFF (equalizer OFF)).

You can store a different equalizer setting for each source.

Selecting the equalizer curve

1 Press (SOURCE) to select a source (Radio, CD, MD or AUX).

2 Press (EQ7) repeatedly to select the desired equalizer curve.

Each time you press (EQ7), the item changes.

To cancel the equalizing effect, select “OFF.”

22