Quickly attenuating the sound

(With the rotary commander or the card remote commander)

Press (ATT).

After “ATT-ON” momentarily appears, “ATT” appears in the display.

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

— Menu

The following items can be set:

SET (Set Up)

•CLOCK-ADJ (page 11)

•BEEP — to turn the beeps on or off.

•RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.

–Select “NORM” to use the rotary commander at the factory-set position.

–Select “REV” when you mount the rotary commander on the right side of the steering column.

•AUX-A (page 24) — to turn the AUX source display on or off.

DSPL (Display)

•DEMO — to turn the demonstration display on or off. (When the unit is turned off.)

–Select “ON” to activate the demonstration display (The demonstration starts about 10 seconds after the unit is turned off).

–Select “OFF” to deactivate the demonstration display.

•CLOCK — to display the clock and the play mode at the same time (ON).

•DIM (Dimmer) — to change the brightness of the display.

–Select “AT” to dim the display only when you turn the lights on.

–Select “ON” to dim the display.

–Select “OFF” to deactivate the Dimmer.

•M.DSPL (Motion Display) — to select the Motion Display mode from “1,” “2,” and “OFF.” (When the unit is turned on.)

–Select “1” to show decoration patterns and spectrum analyzer in the display.

–Select “2” to show decoration patterns in the display.

–Select “OFF” to deactivate the Motion Display.

•A.SCRL (Auto Scroll) (page 12)

–Select “ON” to scroll automatically displayed names exceeding 8 characters.

–When the Auto scroll function is set to “OFF” and the disc/album/track is changed, the disc/album/track name or ID3 tag does not scroll.

continue to next page t

21