Adjusting setup items — SET

1Press and hold the select button.

The setup display appears.

2Press the select button repeatedly until the desired item appears.

3Rotate the volume control dial to select the setting (example “ON” or “OFF”).

4Press and hold the select button.

The setup is complete and the display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

The following items can be set (follow the page reference for details):

z” indicates the default settings.

CLOCK-ADJ(Clock Adjust) (page 4)

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*1(AUX Audio)

To turn the AUX source display “AUX-A-ON” (z) or “AUX-A-OFF” (page 7).

SUB/REAR*1

To switch the audio output.

“SUB-OUT” (z): to output to a subwoofer.

“REAR-OUT”: to output to a power amplifier.

DIM (Dimmer)

To change the brightness of the display.

“DIM-ON”: to dim the display.

“DIM-OFF” (z): to deactivate the dimmer.

DEMO*1 (Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

LPF*2 (Low Pass Filter)

To select the subwoofer cut-off frequency: “LPF OFF” (z), “LPF125Hz” or “LPF 78Hz.”

*1 When the unit is turned off.

*2 When the audio output is set to “SUB.”

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:

Connecting the portable audio device

1Turn off the portable audio device.

2Turn down the volume on the unit.

3Connect to the unit.

AUX

AUX

Connecting cord*

(not supplied)

*Be sure to use a straight type plug.

Adjusting the volume level

Be sure to adjust the volume for each connected audio device before playback.

1Turn down the volume on the unit.

2Press (SOURCE) repeatedly until “AUX FRONT IN” appears.

3Start playback of the portable audio device at a moderate volume.

4Set your usual listening volume on the unit.

5Press the select button repeatedly until “AUX” appears, and rotate the volume control dial to adjust the volume level.

7