LPF*2 (Low Pass Filter)

To select the subwoofer cut-off frequency: “LPF OFF” (z), “LPF125Hz” or “LPF 78Hz.”

*1 When the unit is turned off.

*2 When the audio output is set to “SUB.”

Using optional equipment

Auxiliary audio equipment

5Press the select button repeatedly until “AUX” appears, and rotate the volume control dial to adjust the volume level.

Card remote commander

RM-X114(CDX-GT20W only)

Location of controls

The corresponding buttons on the card remote commander control the same functions as those on this unit.

By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:

Connecting the portable audio device

1Turn off the portable audio device.

2Turn down the volume on the unit.

3Connect to the unit.

DSPL

MENU*

SOURCE

</,

(SEEK –/+)

SOUND

OFF

VOL (+/–)

DSPLMODE

 

PRESET +

 

MENU

DISC +

LIST

SEEK

SOURCE

SEEK+

 

SOUND

DISC

ENTE

 

 

R

 

PRESET –

 

OFF

+

ATT

VOL

MODE

LIST*

m/M

(DISC*/

PRESET +/–)

ENTER*

ATT

AUX

AUX

Connecting cord*

(not supplied)

*Be sure to use a straight type plug.

Adjusting the volume level

Be sure to adjust the volume for each connected audio device before playback.

1Turn down the volume on the unit.

2Press (SOURCE) repeatedly until “AUX FRONT IN” appears.

3Start playback of the portable audio device at a moderate volume.

10 4 Set your usual listening volume on the unit.

The following buttons on the card remote commander have also different buttons/functions from the unit.

SOUND button

The same as the select button on the unit.

</, (SEEK –/+) buttons

To control CD/radio, the same as (SEEK)

–/+ on the unit. (For details of other operations, see “With the card remote commander” on each pages.)

M/m (DISC*/PRESET +/–) buttons

To control CD, the same as GP/ALBM –/+ buttons on the unit. (For details of other operations, see “With the card remote commander” on each pages.)

ATT (attenuate) button

To attenuate the sound. To cancel, press again.

*Not available for this unit.

Note

If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.