Adjusting setup items — SET

1Press and hold the select button.

The setup display appears.

2Press the select button repeatedly until the desired item appears.

3Rotate the volume control dial to select the setting (example “ON” or “OFF”).

4Press and hold the select button.

The setup is complete and the display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

The following items can be set (follow the page reference for details):

“z” indicates the default settings.

CLOCK-ADJ(Clock Adjust) (page 4)

CT (Clock Time)

To set “CT-ON” or “CT-OFF” (z) (page 8, 9).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*1(AUX Audio)

To turn the AUX source display “AUX-A-ON” (z) or “AUX-A-OFF” (page 10).

A.OFF (Auto Off)

To shut off automatically after a desired time when the unit is turned off: “A.OFF-NO” (z), “A.OFF-30S (Seconds),” “A.OFF-30M (Minutes)” or “A.OFF-60M (Minutes).”

DEMO*1 (Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

DIM (Dimmer)

To change the brightness of the display.

–“DIM-ON”: to dim the display.

–“DIM-OFF” (z): to deactivate the dimmer.

M.DSPL (Motion Display)

–“M.DSPL-ON” (z): to show moving patterns.

–“M.DSPL-OFF”: to deactivate the Motion Display.

A.SCRL (Auto Scroll)

To scroll long displayed item automatically when the album/track is changed.

–“A.SCRL-ON” (z): to scroll.

–“A.SCRL-OFF”: to not scroll.

LOCAL (Local Seek Mode)

–“LOCAL-ON”: to only tune into stations with stronger signals.

–“LOCAL-OFF” (z): to tune normal reception.

MONO (Monaural Mode)*2

To improve poor FM reception, select monaural reception mode.

–“MONO-ON”: to hear stereo broadcast in monaural.

–“MONO-OFF” (z): to hear stereo broadcast in stereo.

REG*2 (Regional)

To set “REG-ON” (z) or “REG-OFF” (page 8).

LOUD (Loudness)

To allow you to listen clearly at low volume levels.

–“LOUD -ON”: to reinforce bass and treble.

–“LOUD -OFF” (z) : to not reinforce bass and treble.

BTM (page 7)

*1 When the unit is turned off.

*2 When FM is received.

Using optional equipmentAuxiliary audio equipment

By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below:

Connecting the portable audio device

1Turn off the portable audio device.

2Turn down the volume on the unit.

3Connect to the unit.

AUX

AUX

Connecting cord*

(not supplied)

*Be sure to use a straight type plug.

10