Local Link function (UK only)

This function enables you to select other local stations in the area, even if they are not stored on your number buttons.

1During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2Within 5 seconds, press again a number button of the local station.

Repeat this procedure until the local station is received.

Selecting PTY

1Press (PTY) during FM reception.

The current program type name appears if the station is transmitting PTY data.

2Press (PTY) repeatedly until the desired program type appears.

3Press (SEEK) –/+.

The unit starts to search for a station broadcasting the selected program type.

Type of programs

NEWS (News), AFFAIRS (Current Affairs), INFO (Information), SPORT (Sports), EDUCATE (Education), DRAMA (Drama), CULTURE (Culture), SCIENCE (Science), VARIED (Varied), POP M (Popular Music), ROCK M (Rock Music), EASY M (Easy Listening), LIGHT M (Light Classical), CLASSICS (Classical), OTHER M (Other Music Type), WEATHER (Weather), FINANCE (Finance), CHILDREN (Children’s Programs), SOCIAL A (Social Affairs), RELIGION (Religion), PHONE IN (Phone In), TRAVEL (Travel), LEISURE (Leisure), JAZZ (Jazz Music), COUNTRY (Country Music), NATION M (National Music), OLDIES (Oldies Music), FOLK M (Folk Music), DOCUMENT (Documentary)

Note

You cannot use this function in countries/regions where no PTY data is available.

Setting CT

1Set “CT-ON” in setup (page 10).

Notes

•The CT function may not work even though an RDS station is being received.

•There might be a difference between the time set by the CT function and the actual time.

Other functionsChanging the sound settingsAdjusting the balance and fader— BAL/FAD

1Press the select button repeatedly until “BAL” or “FAD” appears.

The item changes as follows:

LOW*1 tHI*1 tBAL (left-right) t FAD (front-rear) tAUX*2

*1 When EQ lite is activated (page 9).

*2 When AUX source is activated (page 10).

2Rotate the volume control dial to adjust the selected item.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Customizing the equalizer curve— EQ lite

“CUSTOM” of EQ lite allows you to make your own equalizer settings.

1Select a source, then press (EQ) repeatedly to select “CUSTOM.”

2Press the select button repeatedly until “LOW” or “HI” appears.

3Rotate the volume control dial to adjust the selected item.

The volume level is adjustable in 1 dB steps, from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer curve.

To restore the factory-set equalizer curve, press and hold the select button before the setting is complete.

After 3 seconds, the setting is complete and the display returns to normal play/reception mode.

Tip

Other equalizer types are also adjustable.

9