LSEEK –/+ buttonsCD/USB:

To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold); reverse/fast- forward a track (press and hold).

Radio:

To tune in stations automatically (press); find a station manually (press and hold).

MMODE button page 9

To select the radio band (FM/MW/SW); select the play mode of ATRAC Audio Device.

NEQ3 (equalizer) button page 11To select an equalizer type (XPLOD,VOCAL, EDGE, CRUISE, SPACE, GRAVITY, CUSTOM or OFF).OBTM button page 9To start the BTM function (press and hold).PRESET button (located behind the front panel) page 4QFrequency select switch (located on the bottom of the unit)See “Frequency select switch” in the supplied installation/connections manual.RNumber buttons

CD/USB:

(1)/(2): ALBUM –/+To skip albums (press); skip albums continuously (press and hold).(3): REP page 9(4): SHUF page 9(5): DM+ page 4To activate the DM+ function, set “DM+-ON.” To cancel, set “DM+- OFF.”(6): PAUSETo pause playback. To cancel, press again.

Radio:

To receive stored stations (press); store stations (press and hold).SDSPL (display)/SCRL (scroll) button page 9To change display items (press); scroll the display item (press and hold).TAUX input jack page 12To connect a portable audio device.

The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4).

wa < (.)/, (>) buttonsTo control CD/radio/USB, the same as (SEEK) –/+ on the unit.Setup, sound setting, etc., can be operated by < ,.ws DSPL (display) button To change display items.wd VOL (volume) +/– button To adjust volume.wf ATT (attenuate) buttonTo attenuate the sound. To cancel, press again.wg SEL (select) button

The same as the select button on the unit. During the Quick-BrowZer mode, (SEL) (select) is inactive.

wh M (+)/m (–) buttonsTo control CD/USB, the same as (1)/(2) (ALBUM –/+) on the unit.Setup, sound setting, etc., can be operated by M m.wj SCRL (scroll) buttonTo scroll the display item.wk Number buttons

To receive stored stations (press); store stations (press and hold).

Notes

•When ejecting/inserting a disc, keep any USB devices disconnected to avoid damage to the disc.

•If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.

About USB cap

When not using the USB terminal (G), use the supplied USB cap to prevent dust or dirt entering. Keep the USB cap out of the reach of children to prevent accidental swallowing.

7