To eject the disc/slide down the front panel (press); angle the front panel in 3 positions (press and hold).
KUSB terminal 9L (front panel release) button 5MSOURCE buttonTo power on; change the source (Radio/CD/ MD*1/USB/AUX).NLIST button 9, 10, 13To list up.ODSPL (display) button 8, 9To change display items.PFrequency select switch (located on the bottom of the unit)See “Frequency select switch” in the supplied installation/connections manual.QNumber buttonsCD/MD*1/USB*2:
(1): REP 8, 10, 13(2): SHUF 8, 10, 13(3)/(4): GP*5/ALBM*6Radio:
To receive stored stations (press); store stations (press and hold).RSCRL (scroll) button 8, 9To scroll the display item.SOFF buttonTo power off; stop the source.TAUX input jack 12To connect a portable audio device.The following buttons on the card remote commander have also different buttons/functions from the unit. Remove the insulation film before use (page 4).
wa ENTER buttonTo skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold);
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
wd VOL (volume) +/– buttonTo adjust volume.
wf ATT (attenuate) buttonTo attenuate the sound. To cancel, press again.wg SOUND buttonTo enter sound setting.
wh M/mTo select preset stations/skip groups (press); skip groups continuously (press and hold).
wj Number buttonsCD/MD*1/USB*2:
(1): REP 8, 10, 13
(2): SHUF 8, 10, 13
(6): PAUSE*8
To pause playback. To cancel, press again.
Radio:
To receive stored stations (press); store stations (press and hold).
*1 When an MD changer is connected.
*2 When a USB device is connected.
*3 When a CD/MD changer is connected.
*4 When an ATRAC Audio Device is connected.
*5 When an ATRAC is played.
*6 When an MP3/WMA/AAC is played.
*7 If the changer is connected, the operation is different, see page 13.
*8 When playing back on this unit and a USB device.
Notes
•When ejecting/inserting a disc, keep any USB devices disconnected to avoid damage to the disc.
•If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
Tip |
|
For details on how to replace the battery, see |
|
| |
| |
About USB cap |
|
When not using the USB terminal (K), use the |
|
supplied USB cap to prevent dust or dirt entering. |
|
Keep the USB cap out of the reach of children to | 7 |
prevent accidental swallowing. | |
|