The stations cannot be received.
The sound is hampered by noises.
•Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster (only when your car has
•Check the connection of the car antenna (aerial).
•The auto antenna (aerial) will not go up.
tCheck the connection of the power antenna (aerial) control lead.
•Check the frequency.
•When the DSO mode is on, the sound is sometimes hampered by noises.
tSet the DSO mode to “off” (page 11).
Preset tuning is not possible.
•Store the correct frequency in the memory.
•The broadcast signal is too weak.
Automatic tuning is not possible.
•The local seek mode is set to “on.” t Set to “Local off” (page 12).
•The broadcast signal is too weak. t Perform manual tuning.
During FM reception, the “ST” indication flashes.
•Tune in the frequency accurately.
•The broadcast signal is too weak. t Set to “Mono on” (page 12).
An FM program broadcast in stereo is heard in monaural.
The unit is in monaural reception mode.
tSet to “Mono off” (page 12).
USB playbackYou cannot play back items via a USB HUB. This unit cannot recognize USB devices via a USB HUB, and is not compatible with a device that has a HUB function.
Cannot play back items.
•Play back music files are protected by Digital Rights Management (DRM) technology (page 15).
•Play back items on
•If a USB device does not work, reconnect it.
A beep sounds.
During playback, the USB device has been disconnected.
tBefore disconnecting a USB device, make sure to stop playback first for data protection.
The sound is intermittent.
The sound may be intermittent at a
Blank Disc*1
Tracks have not been recorded on the MD.*2
tPlay an MD with recorded tracks.
Checking
The unit is confirming the connection of a USB device.
tWait until confirming the connection is finished.
Error*1
•The disc is dirty or inserted upside down.*2 t Clean or insert the disc correctly.
•A blank disc has been inserted.
•The disc cannot play because of some problem. t Insert another disc.
•USB device was not automatically recognized. t Reconnect it again.
•Press Z to remove the disc.
Failure
The connection of speakers/amplifiers is incorrect.
tSee the installation guide manual of this model to check the connection.
Hubs Not Supported
USB HUB or devices that have a HUB function are not supported on this unit.
Load
The changer is loading the disc.
tWait until loading is complete.
Local Seek +/–
The local seek mode is on during automatic tuning.
NO Album Name
An album name is not written in the track.
NO Device
(SOURCE) is selected without a USB device connected. A USB device or a USB cable has been disconnected during playback.
tBe sure to connect a USB device and USB cable.
NO Disc
The disc is not inserted in the CD/MD changer.
tInsert discs in the changer.
NO Disc Name
A disc/album/group/track name is not written in the track.
NO Group Name
A group name is not written in the track.
NO Information
Text information is not written in the MP3/WMA/ AAC files or ATRAC CD.
NO Magazine
The disc magazine is not inserted in the CD changer.
tInsert the magazine in the changer.
NO Music
The disc is not a music file.
tInsert a music CD in this unit or MP3 playable changer.
tConnect a USB device with a music file in it.
NO Track Name
A track name is not written in the track.
20