Tip

Other equalizer types are also adjustable.

Adjusting setup items — SET

1Press and hold (SELECT).

The setup display appears.

2Press (SELECT) repeatedly until the desired item appears.

3Rotate the volume control dial to select the setting (example “ON” or “OFF”).

4Press and hold (SELECT).

The setup is complete and the display returns to normal play/reception mode.

Note

Displayed items will differ, depending on the source and setting.

The following items can be set (follow the page reference for details):

“z” indicates the default settings.

CLOCK-ADJ(Clock Adjust) (page 7)

CT*1 (Clock Time)

To set “CT-ON” or “CT-OFF” (z) (page 12, 13).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*2(AUX Audio)

To turn the AUX source display “AUX-A-ON” (z) or “AUX-A-OFF” (page 18).

A.OFF (Auto Off)

To shut off automatically after a desired time when the unit is turned off: “A.OFF-NO” (z), “A.OFF-30S (Seconds),” “A.OFF-30M (Minutes)” or “A.OFF-60M (Minutes).”

REAR/SUB*2

To switch the audio output.

–“REAR-OUT” (z): to output to a power amplifier.

–“SUB-OUT”: to output to a subwoofer.

DEMO (Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

DIM (Dimmer)

To change the brightness of the display.

–“DIM-AT” (z): to dim the display automatically when you turn lights on.

–“DIM-OFF”: to deactivate the dimmer.

–“DIM-ON”: to dim the display.

CONTRAST

To adjust the contrast of the display.

The contrast level is adjustable in 7 steps.

ILM (Illumination)

To change the illumination color: “ILM-1” (z) or “ILM-2.”

M.DSPL (Motion Display)

To select the Motion Display mode.

–“M.DSPL-LM” (z): to show moving patterns and level meter.

–“M.DSPL-OFF”: to deactivate the Motion Display.

–“M.DSPL-ON”: to show moving patterns.

A.SCRL (Auto Scroll)

To scroll long displayed item automatically when the disc/album/group/track is changed.

–“A.SCRL-ON” (z): to scroll.

–“A.SCRL-OFF”: to not scroll.

LOCAL (Local seek mode)

–“LOCAL-OFF” (z): to tune normal reception.

–“LOCAL-ON” : to only tune into stations with stronger signals.

MONO*3 (Monaural mode)

To improve poor FM reception, select monaural reception mode.

–“MONO-OFF” (z): to hear stereo broadcast in stereo.

–“MONO-ON”: to hear stereo broadcast in monaural.

REG*1*3 (Regional)

To set “REG-ON” (z) or “REG-OFF” (page 13).

LPF*4 (Low Pass Filter)

To select the subwoofer cut-off frequency: “LPF OFF” (z), “LPF125Hz” or “LPF 78Hz.”

LOUD (Loudness)

To allow you to listen clearly at low volume levels.

–“LOUD-ON” : to reinforce bass and treble.

–“LOUD-OFF” (z): to not reinforce bass and treble.

BTM (page 11)

*1 CDX-HR905IP only.

*2 When the unit is turned off.

*3 When FM is received.

*4 When the audio output is set to “SUB.”

16