Setting the security code
"7*)
"
*
)
1Press (MENU).
2Press <or ,repeatedly to select “Setup.”
3Press (ENTER).
4Press Mor mrepeatedly to select “Security.”5Press (ENTER).
1Press Mor mrepeatedly to enter the first digit2Press ,to move the cursor to the 2nd digit, then press Mor m repeatedly to enter the 2nd digit. Each time you press M, a digit goes up and each time you press m, a digit falls.
3Repeat step 2to enter the 3rd digit and the 4th digit.6Press (ENTER).
7Press Mor mrepeatedly to select “YES.”8Press (ENTER).
Notes
•The security code cannot be entered by the number buttons
•Make sure not to forget your security code.
•If you select “NO” in step 7 and press (ENTER), the display returns to the Code Set display in step 5.
After the security code setup is completed
*
)
7*,)
.Mm,0(ENTER)Code Input displayOK% NG%F2!!2!G ")
Cancelling the security code!47FG
.0
,).Mm,0
(ENTER)Code Del displayOK%NG%F2!!2!G ")
Note
You cannot change the security code unless you delete your stored code.
Tip
If the security code is not stored, the Code Del display does not appear.
35