masterpage:Right |
Clearing display characters automatically
—Auto Clear (Spectrum analyzer/Panorama/ Full motion mode)
You can make display characters disappear for a moment in Spectrum analyzer/Panorama/Full motion mode. When set to ON, you can display the display characters only when the disc, album, or track is changed or the source or display mode is changed. You can enjoy full images.
1 Play or receive the source (radio, CD, MD, or AUX).
2 Press (GRAPHIC).
3 Press < or , repeatedly to select “AutoClear.”
Each time you press < or ,, the item changes as follows:
AutoClear y BlendLevel y
Background y Color Sel y
SlideShow y AutoClear
4 Press (ENTER).
Changing the translucence ratio of the characters
You can set the translucence ratio (color density) of the characters in the Spectrum analyzer/ Panorama/Full motion mode.
By setting this level down, you can adjust the characters in the display to appear opaque.
1 Playback or receive the source (radio, CD, MD, or AUX).
2 Press (GRAPHIC).
3 Press < or , repeatedly to select “BlendLevel.”
Each time you press < or ,, the item changes as follows:
AutoClear y BlendLevel y
Background y Color Sel y
SlideShow y AutoClear
4 Press (ENTER).
5 Press (ENTER).
5 Press (ENTER).
6 Press M or m to select “ON.”
To cancel the Auto Clear function, select “OFF.”
7 Press (ENTER).
8 Press (GRAPHIC).
The display returns to the normal display.
Note
In Standard/Clock mode, you cannot make the display characters disappear automatically.
6 Press < or , to select the permeation ratio (Level
The lower the level, the paler the display characters.
7 Press (ENTER).
8 Press (GRAPHIC).
The display returns to the normal display.
Notes
•In Standard/Clock mode, you cannot change the translucence ratio of the display characters.
•If you set “Auto Clear” to “ON” (page 21) or “Background” to “ON” (page 22), the translucence ratio of the display characters does not change.
21
