Press (ENTER).
Tune in a station you want to erase.
Storing the station names— Station Memo

You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name of up to eight characters for a station.

Storing the station names1 Tune in a station whose name you want to store.2 Press (MENU), then press M or m repeatedly until “Name edit” appears.

3 Press (ENTER).

4 Enter the characters.

1Press M repeatedly to select the desired characters.

(A t B t C t ··· Z t 0 t 1 t 2 t

··· 9 t + t – t * t / t \ t > t < t . t )

If you press m repeatedly, the characters appear in the reverse order.

If you want to put a blank space between characters, select “ .”

2Press , after locating the desired character.

The next character flashes.

If you press <, the previous character flashes.

3Repeat steps 1 and 2 to enter the entire name.

5 To return to the normal radio reception, press (ENTER).

Tips

•To erase or correct a name, enter “ ” (under- bar) for each character.

•There is another way to start storing station names. Press (LIST) for two seconds instead of steps 2 and 3. You can also complete the operation by pressing (LIST) for two seconds instead of step 5.

Displaying the station namePress (DSPL) during radio reception.

Each time you press (DSPL), the item changes as follows:

B

Station name*

BFrequency

*If the station name of a station is not stored, “NO Name” appears in the display for one second.

Erasing the station name

1

2 Press (MENU), then press M or m repeatedly until “Name Del” appears.

3

4 Press M or m to select the station name you want to erase.5 Press (ENTER) for two seconds.

The name is erased.

Repeat steps 1 through 4 if you want to erase other names.

6 Press (MENU) twice.

The unit returns to the normal radio reception mode.

Note

When you erase all of the station names, “NO Data” appears in step 5.

18