24
By pressing buttons
*1 Only if the corresponding optional equipment is
connected.
*2 If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for 2
seconds to turn off the clock indication after turning
off the ignition.
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change the disc*.
*When an optional CD/MD unit is connected.
Tip
You need to push in and rotate the control each time
you select a preset station and a disc.
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Set the Rev/Nor-select switch to “Rev.”
Press To
(SOURCE) Change source
(radio/CD/MD*1/TV*1)
(MODE) Change operation
(radio band/CD unit/MD*1
unit/TV band*1)
(ATT) Attenuate sound
(OFF)*2Stop playback or radio
reception
(SOUND) Adjust the sound menu
(DSPL) Change the display item
OFF
Rotate the VOL control
to adjust the volume.
(SOURCE)
(SOUND)
(ATT)
(DSPL)
(OFF)
(MODE)
Turn the dial to change the
direction of infrared rays.
(RM-X5 only)
SEEK/AMS
control
SOURCE
PRESET/DISC
control
To increase
To decrease
Rev Nor