The following items can be set (follow the page reference for details):

“z” indicates the default settings.

SetupClock Adjust (page 4)Beep

To set “on” (z) or “off.”

AUX-A*1(AUX Audio)

To turn the AUX source display “on” (z) or “off” (page 13).

Display

Clock (Clock Information)

To display the clock and the display items/image at the same time.

–“on”: to display at the same time.

–“off” (z): to not display at the same time.

A.IMG (Auto Image)

Auto Image mode automatically steps (every 10 seconds) through the display images.

–“off” (z): to not change the image automatically.

–“SA”: to step repeatedly through the display images of Spectrum analyzer.

–“Movie”: to step repeatedly through the display images of Movie mode.

–“All”: to step repeatedly through the display images in all display modes.

Info (Display Information)

To display the items (depending on the source, etc.) at the bottom of the display while a image is displayed.

–“on” (z): to display the items.

–“off”: to not display any items.

Dimmer

To change the brightness of the display.

–“Auto” (z): to dim the display automatically when you turn lights on.

–“on”: to dim the display.

–“off”: to deactivate the dimmer.

Demo*1 (Demonstration)

To set “on” (z) or “off” (page 4).

Contrast*2

To adjust the contrast of the display.

The contrast level is adjustable in 7 steps.

A.Scroll (Auto Scroll)

To scroll long displayed item automatically when the disc/group/track is changed.

–“on”: to scroll.

–“off” (z): to not scroll.

Receive Mode

Local (Local seek mode)

–“on”: to only tune into stations with stronger signals.

–“off” (z): to tune normal reception.

Mono (Monaural mode)

To improve poor FM reception, select monaural reception mode.

–“on”: to hear stereo broadcasts in monaural.

–“off” (z): to hear stereo broadcast in stereo.

IF

–“Auto” (z): to narrow automatically the reception frequency to eliminate noise.

–“Wide”*3: to always hear FM stereo broadcasts in stereo and with full the frequency signal reception.

SoundEQ7 Tune (page 9)

HPF (High Pass Filter)

To select the front/rear speaker cut-off frequency: “off” (z), “78Hz” or “125Hz.”

LPF (Low Pass Filter)

To select the subwoofer cut-off frequency: “off” (z), “125Hz” or “78Hz.”

Loudness

To enhance bass and treble at lower volume.

–“on”: to reinforce bass and treble.

–“off” (z): to not reinforce bass and treble.

AUX Level

To adjust the volume level for each connected auxiliary equipment (page 13). This setting negates the need to adjust the volume level between sources.

EditName Edit (page 10)Name Delete (page 10)

BTM (page 8)

*1 When the unit is turned off.

*2 “Contrast” appears and can be adjusted only when the sub display window.

*3 In such cases, some FM stereo broadcasts may become monaural while in the stereo reception mode.

Using optional equipment

CD/MD changerSelecting the changer

1Press (SOURCE) repeatedly until “CD” or “MD” appears.

continue to next page t

11